Batboard

Just turned my newly bougth MT2100 on and the display shows just C:1 A:2222. model: M01rhn9an8an
It allows me to a enter a new number for C but only accepts 1. How do I get on from here? Just wanted to make sure the set is working before attemting programming for 70cm amateur use.

thx in adavnce
Erik/DK

The radio should be ok.
You have to program it first because there´s only the default codeplug in your radio!
Always use the 2100 series DOS rss for the mobile 2100 radios!

Andreas