HHCM GLN1052 from McMicro to M110

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
sb
Posts: 88
Joined: Sun Sep 09, 2001 4:00 pm

HHCM GLN1052 from McMicro to M110

Post by sb »

Hi!
I connected GLN1052 from dead McMicro to M110. It is working O.K. but I can change channels in one direction only.
All buttons are working except the "house" button. I do not have the manual for GLN1052 so I don´t know if this button is for "CH UP" or not ?

Image
Beno, s56kz
Top
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: HHCM GLN1052 from McMicro to M110

Post by Jim202 »

sb wrote:Hi!
I connected GLN1052 from dead McMicro to M110. It is working O.K. but I can change channels in one direction only.
All buttons are working except the "house" button. I do not have the manual for GLN1052 so I don´t know if this button is for "CH UP" or not ?

Image



By any chance have you looked at the programming to see how the mic buttons are set up? Some of them I believe can be changed to different functions in the software.

Jim
Top
User avatar
sb
Posts: 88
Joined: Sun Sep 09, 2001 4:00 pm

Re: HHCM GLN1052 from McMicro to M110

Post by sb »

Hi!
Found the manual of Storno CQM5500 which is the the same radio. I have the SELECT 5 radio so it is only one button for channel select.

Image
Beno, s56kz
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”