GM300 MDC Receive RSS Q

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
jayembee
New User
Posts: 8
Joined: Fri Apr 10, 2009 1:08 pm
What radios do you own?: Maxtrac300, GM300x2, MinIII

GM300 MDC Receive RSS Q

Post by jayembee »

In playing with my GM300, I can't quite figure out where to put the IDs to decode. I'm using the V5 RSS.

Any help would be appreciated, please.

Thanks!
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Re: GM300 MDC Receive RSS Q

Post by HLA »

you don't, where is it going to display it at even if it could?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
jayembee
New User
Posts: 8
Joined: Fri Apr 10, 2009 1:08 pm
What radios do you own?: Maxtrac300, GM300x2, MinIII

Re: GM300 MDC Receive RSS Q

Post by jayembee »

HLA wrote:you don't, where is it going to display it at even if it could?
On my beautiful 2 digit display. :P

I was under the impression that this unit could decode MDC and as long as the ID you wanted to receive was in a call list, you could assign it a 2 digit alias to display. When receiving MDC now, it displays 00, which according to other posts, indicates that the ID received has been decoded and isn't in the "alias" list.

Again, any help?
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Re: GM300 MDC Receive RSS Q

Post by wavetar »

'Call list Configuration'...from Main Menu press 'F4'-->'F9'. Press 'F8' to add and then define each call list member.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
jayembee
New User
Posts: 8
Joined: Fri Apr 10, 2009 1:08 pm
What radios do you own?: Maxtrac300, GM300x2, MinIII

Re: GM300 MDC Receive RSS Q

Post by jayembee »

wavetar wrote:'Call list Configuration'...from Main Menu press 'F4'-->'F9'. Press 'F8' to add and then define each call list member.
Worked like a charm. Thanks!!!
Top
Post Reply

Return to “Radio Programming”