AS III error question

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
jban
Posts: 385
Joined: Tue Nov 23, 2004 8:26 am
What radios do you own?: AS mob, ASIII, XTS/XTL

AS III error question

Post by jban »

friend of mine reported that his Astro Saber III is displaying an error message "error 9/10". Any info out there? He stated it was working fine, set it down and came back to the error. He did the on/off and remove the battery thing but no resolve. Any help appreciated. This is a VHF model as well.
John B
Top
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: AS III error question

Post by Mfire39 »

A fail 09/10 is usually a secure hardware error.. Is the radio secure equipped and or programmed for secure?


-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
Top
User avatar
jban
Posts: 385
Joined: Tue Nov 23, 2004 8:26 am
What radios do you own?: AS mob, ASIII, XTS/XTL

Re: AS III error question

Post by jban »

I programmed it a couple years ago and yes it was secure equipped. I did not enable the secure features that I recall. I have not had the opportunity to put hands on the radio as of yet.
John B
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”