RICK Configuration

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
joes243
Posts: 68
Joined: Tue Apr 20, 2010 9:44 am

RICK Configuration

Post by joes243 »

We have x-band UHF/Low band mobile repeaters in our trucks. Is there anyway to configure the RICK that when enabled if a user transmits on the low band mobile (same radio used in the repeater) that it will also transmit on the UHF?

Thanks
Top
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: RICK Configuration

Post by Bill_G »

You would have to modify the radios, not the RICK. The local mic PTT does not show up at it's own accessory plug as COR, and mic audio does not show up as rx audio.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”