I just programmed a Saber II for a friend to use, and I discovered that while scanning, the priority sampling is VERY slow, muting the audio on active channels for around 1 second each time it checks.
My other Saber II does not do this, it samples so fast that I can barely tell that it is sampling the other channel.
Is there a way to adjust the sample interval?
Saber II Programming issue (Scan Priority Sampling)
Moderator: Queue Moderator
Re: Saber II Programming issue (Scan Priority Sampling)
Bump...
And I just programmed another one that came from the same agency.. this one samples twice as fast as the last, but it's still slow. I wish I could disable the priority sampling completely, but I know that isn't possible with these.
Both of these radios are securenet models if that makes a difference.
And I just programmed another one that came from the same agency.. this one samples twice as fast as the last, but it's still slow. I wish I could disable the priority sampling completely, but I know that isn't possible with these.
Both of these radios are securenet models if that makes a difference.
Jake
Re: Saber II Programming issue (Scan Priority Sampling)
As an update to this and future reference for anyone that is experiencing the same issues... the problem went away after I put a secure module in the radio, and both radios have stopped trying to priority sample while scanning. I do still get a priority channel alert on the selected channel while scanning.
Jake