MTS2000 Codeplug Too New

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
freqscout
Posts: 1
Joined: Mon Feb 13, 2006 5:17 pm

MTS2000 Codeplug Too New

Post by freqscout »

I have an MTS2000 that I bought off of Ebay. It says it's codeplug is too new for my version of RSS. Is there a way to revert the radio to the older RSS version using RSS or Lab?
Top
N4KVE
Posts: 1652
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: APX XTS XTL TRBO 900MHZ

Re: MTS2000 Codeplug Too New

Post by N4KVE »

If the firmware is newer than 5.41, then you don't want to use lab on the radio. The MTS line has been using CPS for quite a few years now, & if that's what this radio has been programmed with, that's what it need again. GARY N4KVE
Top
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: MTS2000 Codeplug Too New

Post by n7maq »

If you have a matching codeplug (same model and flash) that your RSS, or CPS can read then you should able to clone into it.

Jim
Top
Post Reply

Return to “Radio Programming”