Wire U-94 PTT to a Saber II Hirose acc.

[Willret]

Hi!

I have scanned around the forum for info about how to use the Hirose acc.
plugg for saber II to connect a U-94 PTT and Bowman headset. I found some old post but can't get it to work completly.
I can get it to work but having some problems with heavy noise on the signal when transmitting and low mic sound.

I am using a Saber II -> Hirose 6pin -> U-95 Ptt with Nexus TP120 plugg ->
Bowman H4855 headset.

I can filter the disturbens while transmitting with a 10 uF electrolic cap,
as explain here:
http://batboard.batlabs.com/viewtopic.p ... 01&start=0
But it allso lower the mic sound.

Mic+ -> Mic+ /Mic- -> Ground (with a electric cap between them)
Bat+ -> Mic+
PTT -> PTTswitch -> Ground
Spk -> Spk -> Ground
Int/Ext -> Ground

Seems like people have done this before but haven't found anyone that described it completly.
Can anyone give me any advice? Should I connect it any other way?

Best regards!
Wille