Centracom gold and centracom crt +

[kc0sdu]

does anyone know the pin out to the cable that goes between the CIE and the Computer? the db9 or DB25 to rj45 that goes connects the CIE to the PC

[d119]

Mods: Please move to System Infrastructure.

I have the pinout at work and if I can remember, I'll post it here tomorrow. Hopefully someone will come up with it in the meantime. The pinout I have is the wiring for an RJ45-DB9 adapter for the PC end, then it's just a straight through Ethernet cable from the CIE to the PC.

[kf4lhp]

We just built a whole pile of these adapters:

CIE to PC Interface Cable

DB9(F) RJ45 (Plug)
1 / Brown / Red
2 / Blue / Green
3 / Yellow / Black
4 / Green / Orange
5 / Red / Slate
6 / Black (tied to 7 and 8 )
7 / Orange (tied to 6 and 8 )
8 / Slate (tied to 6 and 7)
9 open

Edit: damn smilies

[kc0sdu]

so it straight through like DB9 pin 1 goes to RJ45 pin 1 etc etc please clarifiy

[d119]

Lets try this.

• DB9F <-> RJ-45
• 1 ---->1 (Blue)
• N/C ---->2 (Orange)
• 6 ---->3 (Black)
• 2 ---->4 (Red)
• 4 ---->5 (Green)
• 3 ---->6 (Yellow)
• N/C ---->7 (Brown)
• 5 ---->8 (Slate/Gray/White)

Essentially when you buy one of these adapter hoods, you get a package that contains a connector hood with an RJ45 in it that has colored leads that have female pins on the ends. You also get a DB9F connector to insert the pins into. Using the above chart, the rightmost column shows which colors get inserted into the DB9F pin sockets listed in the leftmost column.

The provided pinout works for both CIE to PC and CEB RS-232 to PC (so you can program the CEB with it and then hook it up to the CIE and run your OP.