Page 1 of 1
spectra railroad to david clark hookup
Posted: Tue Jul 26, 2011 12:44 am
by drgw
hello, trying to hook up a david clark adapter c3019 to a railroad spectra, can i use the 12 pin bayonet plug..will this work ?and what wires go where...thanks in advance...
Re: spectra railroad to david clark hookup
Posted: Wed Jul 27, 2011 1:17 pm
by k2hz
The normal headset connection is to the 6 pin AAR MIC connector.
Clark makes a standard adapter for this application:
http://www.davidclark.com/PDFfiles/1866 ... n%20bw.pdf
If you want to try to modify your adapter for the 12 pin Auxillary connector, the pinout is:
A- Mic Audio
B- Mic Gnd
C- PTT
D- Handset/PTT Return
E- Handset Audio
J- Hang-up return
K- Hang-up
M & N FLOATING Speaker Hi/Lo
Re: spectra railroad to david clark hookup
Posted: Thu Jul 28, 2011 11:04 pm
by Will
The headset plug:
Tip 1 Mic ground
2 Audio +
3 Mic +
4 Audio ground