xts 3000 error 09/10

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
BigTex1136
Posts: 509
Joined: Sat Nov 08, 2003 4:45 am
What radios do you own?: XTS APX VIKING KENWOOD

xts 3000 error 09/10

Post by BigTex1136 »

My xts 3000 II is flashing an error 09/10. What does that mean?
Image
GOT MODAT?
Top
User avatar
BigTex1136
Posts: 509
Joined: Sat Nov 08, 2003 4:45 am
What radios do you own?: XTS APX VIKING KENWOOD

Re: xts 3000 error 09/10

Post by BigTex1136 »

Opps never mind. I figured it out. secure hardware fail. Thanks
Image
GOT MODAT?
Top
torontokris
New User
Posts: 43
Joined: Fri Jan 16, 2009 9:50 am

Re: xts 3000 error 09/10

Post by torontokris »

09/10 doesnt necessarly 100% mean a hardware fail does it?

I think 09/10 is
"Secure option not communicating with radio"

09/90 was
Secure Hardware Fatal Error




BigTex1136 wrote:Opps never mind. I figured it out. secure hardware fail. Thanks
Top
User avatar
WZ1
New User
Posts: 8
Joined: Thu Sep 04, 2008 4:15 am
What radios do you own?: Too Many

Re: xts 3000 error 09/10

Post by WZ1 »

I believe it means the radio has the correct flash for encryption, and encryption has been enabled in the codeplug but might not have the hardware.. or is missing a key.

ERROR 09/10 SecureNet serial bus failure.
Man who scratch ass should not bite fingernails
Top
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: xts 3000 error 09/10

Post by escomm »

WZ1 wrote:I believe it means the radio has the correct flash for encryption, and encryption has been enabled in the codeplug but might not have the hardware.. or is missing a key.

ERROR 09/10 SecureNet serial bus failure.
Pretty sure it's just the hardware is missing

If only a key is missing then a key fail message will be displayed but I don't think the 09/10 will come out unless the board is missing or non-operational
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Re: xts 3000 error 09/10

Post by wavetar »

escomm wrote: If only a key is missing then a key fail message will be displayed but I don't think the 09/10 will come out unless the board is missing or non-operational
Confirmed.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
Post Reply

Return to “Radio Programming”