Page 1 of 1
xts 3000 error 09/10
Posted: Sun Sep 18, 2011 3:54 pm
by BigTex1136
My xts 3000 II is flashing an error 09/10. What does that mean?
Re: xts 3000 error 09/10
Posted: Sun Sep 18, 2011 4:09 pm
by BigTex1136
Opps never mind. I figured it out. secure hardware fail. Thanks
Re: xts 3000 error 09/10
Posted: Sun Oct 16, 2011 10:40 pm
by torontokris
09/10 doesnt necessarly 100% mean a hardware fail does it?
I think 09/10 is
"Secure option not communicating with radio"
09/90 was
Secure Hardware Fatal Error
BigTex1136 wrote:Opps never mind. I figured it out. secure hardware fail. Thanks
Re: xts 3000 error 09/10
Posted: Tue Oct 25, 2011 6:26 am
by WZ1
I believe it means the radio has the correct flash for encryption, and encryption has been enabled in the codeplug but might not have the hardware.. or is missing a key.
ERROR 09/10 SecureNet serial bus failure.
Re: xts 3000 error 09/10
Posted: Tue Oct 25, 2011 8:33 am
by escomm
WZ1 wrote:I believe it means the radio has the correct flash for encryption, and encryption has been enabled in the codeplug but might not have the hardware.. or is missing a key.
ERROR 09/10 SecureNet serial bus failure.
Pretty sure it's just the hardware is missing
If only a key is missing then a key fail message will be displayed but I don't think the 09/10 will come out unless the board is missing or non-operational
Re: xts 3000 error 09/10
Posted: Tue Oct 25, 2011 11:40 am
by wavetar
escomm wrote:
If only a key is missing then a key fail message will be displayed but I don't think the 09/10 will come out unless the board is missing or non-operational
Confirmed.