GM338 for VHF marine channels

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
hellobd
New User
Posts: 2
Joined: Mon Mar 22, 2010 2:03 am

GM338 for VHF marine channels

Post by hellobd »

Hi,

I am using GM338, for communication my sea going vessel. My Tower is 50 meter high, and distance between tower and base station is around 100 meter. I have used Andrew LDF4-50A as the feeder cable. Now i can communiacte in channel 69 only, but in channel 74 i can receive only but i can not transmit.

Anyone please help.

Regards
Rawhid
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: GM338 for VHF marine channels

Post by Will »

Double check your radio programming, Ch 74 is simplex Port Operations.
Top
bg7iae
New User
Posts: 1
Joined: Sat Nov 12, 2011 10:17 am

Re: GM338 for VHF marine channels

Post by bg7iae »

Please try check frequency and tone code.
Top
Post Reply

Return to “Radio Programming”