AS3 display question

007 · Post by **007** » Tue Dec 09, 2003 1:31 am

How does a guy go about changing the contrast on his AS3 display?

Mine is a tad lighter than I'm used to on my Jedi's, and I'd like to darken it up if possible.

Thoughts?

Dale Earnhardt · Post by **Dale Earnhardt** » Tue Dec 09, 2003 1:35 am

you will have to unscrew the bottom, slide the radio out, and at the bottom of the LCD Screen, at the right, u should see a small hole, u will have to use a small flat head screw driver, and either turn it half clock wise or half way back, but do this, slide it back in, turn on the radio, if it needs to be darker or lighter, just keep turning it, and putting it back in, until you get it right, its a pain in the butt, probally will take 4 trys to get it just right, after that, u should be happy with it.

007 · Post by **007** » Tue Dec 09, 2003 11:07 am

Thanks! Much better...

It's clockwise to make darker, counterclockwise to lighten.

sglass · Post by **sglass** » Wed Dec 10, 2003 9:14 pm

very cool, just adjusted mine