RTK-4070A??

[kc2dla]

Is this a Spectra Keyload cable and does it have the mx style connector to connect to a T3020BX?

This isn't some test cable for that silly DES test set is it?

Thanks,
Paul

[DJP126]

This is the cable used to interface the R2000D/R2670 Series analyzers with secure comm options to the Expo, Syntor X 9000 or the MSF5000 radios. It has the five pin DIN plug on one end. The KVL to Spectra cable is TKN8531C.

[kc2dla]

Thanks, that clears things up a bit.
Suppose I remove the connector for the analyzer and put an MX style connector on the end. Would this allow me to keyload Spectras, EXPOs, and hirose Sabers?

Paul

[DJP126]

I don't know about the SABER, it seems to me that they required a different cable. The part numbers I have all interface with test equipment not the KVL (I got lucky on the KVL to Spectra number). Changing the DIN connector to the MX type should work OK.

[batdude]

the 20x4/d series monitors use a DB-15 connector for interfacing to the RTL 4200 breakout box

if that cable has a 5 pin (whatever) DIN plug on it, then it's for either the DES/DVP test boxes or for the RTL4200...


doug