Squelch settings on xts3000 III

SNO-MAN · Post by **SNO-MAN** » Wed Feb 18, 2004 6:07 am

Good day to all, I have a xts3000 III and a detailed service manual and I need to loosen up the squelch in analog mode ( and it wouldn't hurt to touch-up the rcvr) and suggestions or comments would help.
Also found the radio was only doing 2.3 watts, ok now.

Host Firmware: R05.51.00
DSP Fimrware: DSPN06.04.11
Flashcode: 591008-4F1E00-9

mike m · Post by **mike m** » Wed Feb 18, 2004 8:37 am

It's all done in the CPS under the individual personality screen for RX channels.

Look for Squelch fine tune, the default is something like 6 which typically gives an opening around 10 or 11 dB SINAD.

SNO-MAN · Post by **SNO-MAN** » Wed Feb 18, 2004 9:15 am

Thanks, Works awesome..

The Pager Geek · Post by **The Pager Geek** » Wed Feb 18, 2004 9:33 am

Sno-Man.. out of curiousity... is that a 512k or 1m XTS?

Just checking something...

tpg