XTS3000 Help

Wes · Post by **Wes** » Sun May 02, 2004 8:31 pm

Hello all......

I am looking at purchasing a used XTS3000 800 Mhz. My county is soon switching from VHF to APCO 25 digital on 800 MHz. The radio i have found is the following.......

Model H09UCC9PW5BN. Flash code 1000040000004

can anyone help me out and tell me if this will work on the new system. have I provided enough information to tell?

all help appreciated here......new to digital trunking.....

Wes

Wes · Post by **Wes** » Mon May 03, 2004 8:10 am

i have read the newbie giude......thanks for the reply....i'll check with him on the firmware.....

if i post it here, can you tell me if it is what i need???

Wes

Post by **wavetar** » Mon May 03, 2004 1:47 pm

Wes wrote:
if i post it here, can you tell me if it is what i need???

Wes

Yes.

Todd

Wes · Post by **Wes** » Wed May 05, 2004 11:25 pm

Ok,

they guy with the first XTS3000 i was looking at has failed to contact me back. I have located another XTS3000 and here is the Model number and flashcode for it......

H09UCF9PW7BN

100008000000

Can you tell me what it is capable of?

I really appreciate you guys helping me out on this.

Wes

RocketNJ · Post by **RocketNJ** » Thu May 06, 2004 3:31 am

800 MHz model 3 SmartZone trunking. Astro ready.

It would also be good to get the host/dsp info to confirm it is IMBE.

George

Wes · Post by **Wes** » Fri May 28, 2004 7:57 am

I recieved the above mentioned radio today. I will need it to do APCO 25 Digital, If that flash code dont have it? what must be done to upgrade??

Also, the radio does have the IMBE Vocoder.

Thanks

Wes

Wes · Post by **Wes** » Fri May 28, 2004 4:08 pm

Sorry If I confused anyone here.......

After my last post I tired the flashcode decoder

http://www.radioreference.com/modules.php?name=Flash

and it told me I have

Options Installed on this Flashcode:

100008-000000-0

Q806/G806 IMBE / APCO-25 Digital Operation
H38/G51 Smartzone Operation

So, i guess that kinda answers my question, but to answer your question, here is the rest of the information.....

Model: H09UCF9PW7BN

R 07.03.00

DSPN 07.03.12

1 MEG

with this additional information, does it tell me any other options my radio has or is capable of???

Thank you guys for putting up with my ignorance.....

Wes

Radiogeek97 · Post by **Radiogeek97** » Sat May 29, 2004 1:41 am

WES
What the host dsp you posted tell you is that the flashcode you have for the radio will actually work with it. Your host/dsp while not the latest will be more than adequate to SUPPORT the flashcode in the radio. The host/dsp will not actually "give" you any more features, it just allows certan features "ie astro digital" to work in the radio.

Wes · Post by **Wes** » Sat May 29, 2004 1:46 am

Wes · Post by **Wes** » Sun May 30, 2004 8:22 pm

A big thanks goes out to all of you who took the time to reply to my questions!!!

This is a great board!!!!

Wes