HT1000

chad_g69 · Post by **chad_g69** » Sat Mar 16, 2002 2:15 pm

i have a HT1000 w/ RSS, and LAB software

the radio wis set for VHF (150mhz range)

i was wondering if i used the LAB software to change it to a 800MHz range by changing the model#... would it work, or kill the radio???

thanks
chad

2wayguy · Post by **2wayguy** » Sat Mar 16, 2002 2:20 pm

You need to change the rf board to the proper band.. Won't work without doing that..

RadioSouth · Post by **RadioSouth** » Sat Mar 16, 2002 3:20 pm

If your in need of 800 MHz you can pick up a
MTX8000 B5 on EBay in the area of $100-$125.
Your VHF HT-1000 is worth considerably more assuming it works right $300+ You can sell yours, buy what you need and pocket a couple
hundred.

Will · Post by **Will** » Sat Mar 16, 2002 5:56 pm

Trying to use LAB that way WILL make a solid lead brick out of your radio. Best advice is to NOT use lab on anything, it takes a very skilled tech to work with lab.
The VHF radio is worth too much for that.

motor59 · Post by **motor59** » Sat Mar 16, 2002 7:51 pm

I've got an 800mhz MTX I was thinking of posting on ebay. Contact me privately if you are interested in a trade...

Ben · Post by **Ben** » Sun Mar 31, 2002 10:35 am

I just want to let everybody on the board know I made a swap with this guy for his HT 1000 and when it arrived it didn't transmit. He stated it did when he shipped it. I'm looking for a good B version code plug to put in it to see if that is the problem. I think he tried to hack it and screwed it up and then traded it as a good radio.
BE CAREFULL!!

Chris · Post by **Chris** » Sun Mar 31, 2002 10:55 am

What is the model # of the radio?

Ben · Post by **Ben** » Sun Mar 31, 2002 3:09 pm

Model number is H01KDC9AA1BN

<font size=-1>[ This Message was edited by: Ben on 2002-03-31 18:10 ]</font>