Moto rib to vertex problem

n5tbu · Post by **n5tbu** » Mon Apr 01, 2002 9:01 am

Has anybody got the vertex programmer working? I made the cables found here on batlabs and it won't work on some VX-3000V.
Ant help would be appreciated.
Mark

K2XM · Post by **K2XM** » Mon Apr 01, 2002 11:53 am

On 2002-04-01 12:01, n5tbu wrote:
Has anybody got the vertex programmer working? I made the cables found here on batlabs and it won't work on some VX-3000V.
Ant help would be appreciated.
Mark

HUH??? Are you trying to program
a Vertex radio using a Motorola
programming cable and RIB??

RadioSouth · Post by **RadioSouth** » Mon Apr 01, 2002 12:19 pm

Vertex programmer ? This forum deals in Motorola brand radios/acc's.

Wes · Post by **Wes** » Mon Apr 01, 2002 12:31 pm

Boy, some people haven't a CLUE!!!

Post by **alex** » Mon Apr 01, 2002 12:34 pm

You could try over here...

http://radio.the161.net

-Alex

fireradio · Post by **fireradio** » Mon Apr 01, 2002 1:05 pm

I think he must be talking about this:

http://www.batlabs.com/images/rib2vrtx.gif

found on the RLN4008B RIB page on batlabs.

jim · Post by **jim** » Mon Apr 01, 2002 1:12 pm

A RIB will program a Vertex radio with a different cable to the computer.

I built the cables that BatLabs has listed and it worked fine.

n5tbu · Post by **n5tbu** » Mon Apr 01, 2002 1:23 pm

Jim,that is what I built,and they have been double checked for accuracy,it will not work for me!

April · Post by **April** » Mon Apr 01, 2002 2:21 pm

Most ALL Vertex software is DOS based, and needs to be run from PURE DOS not the windows 9X stuff. Boot to DOS 6.xx from a floppy disk and try, you may be amazed!