Saber Question

rick0001 · Post by **rick0001** » Wed Aug 04, 2004 12:38 pm

Can a saber III scan on all freqs?

Thanks

The Pager Geek · Post by **The Pager Geek** » Wed Aug 04, 2004 12:44 pm

Holy Vague.....

Original Saber?
Saber Si?
Astro Saber?

Define "All Freq"

tpg

rick0001 · Post by **rick0001** » Wed Aug 04, 2004 1:02 pm

Astro Saber
and lets say freq 136 to 174.

Thanks

mancow · Post by **mancow** » Wed Aug 04, 2004 2:50 pm

It will scan whatever is in the list you create. You can only scan one list at a time. The list can contain any frequency in its operating range of 136-174.

mancow

jedi_saber · Post by **jedi_saber** » Wed Aug 04, 2004 3:05 pm

To answer your question if it can do something like a ham vfo scan or all frequencies between 136-174... No.

007 · Post by **007** » Thu Aug 05, 2004 12:16 am

The AS, like all /\/\'s, is not a ham radio therefore it doesn't do "VFO scan". It will only scan the user-created scan list(s) of actual channels.

1 Scan list = 16 channels

You can either have a "radio-wide" scan list by creating one scan list, and assigning that list to all zones...or you can have a "Zone-slaved" scan list for each radio by creating a separate scan list for each zone.

As mentioned before, only one 1 scan list can be scanned at one time. If you are using the AS in a busy area, use a zone-slaved scan setup. If you only need to scan a few channels spread out thru the radio, use a radio-wide scan list.

rick0001 · Post by **rick0001** » Thu Aug 05, 2004 4:56 am

Thanks guys you just answered my question.

Rick