Pac*RT function on MT-2000 Mobile charger ???

bmoulton · Post by **bmoulton** » Tue Aug 17, 2004 11:46 pm

I just picked up a Mobile charger off ebay for my Mt-2000.
It has a Light maked Pac*RT and a switch that says Rptr and off.
Can anyone tell me what these are for ???
Model number is TDN9816A
Also wondering what the white wire is for ?

thebigphish · Post by **thebigphish** » Wed Aug 18, 2004 12:37 am

ok, that's a moto niCad charger for the MT2k that interfaces with a PacRT, and the switch would put in inline w/ the repeater or std operations, and the light indicates such....howeever,i'm not a PacRT person, someone else on the board might have more info for you.

kf4sqb · Post by **kf4sqb** » Thu Aug 19, 2004 5:57 pm

Chris, you pretty well covered it. With the switch set to the "Rptr" position, it activates an attached PAC RT whenever the HT is removed from the charger, and de-activates it when the HT is returned to the charger. When set to "Off", the PAC RT stays off when the HT is removed. If you are not using a PAC unit, don't worry about it. It will function as a normal charger, however the switch is set. Don't know about the white wire, though. Could be the wire to go to the PAC?

thebigphish · Post by **thebigphish** » Sat Aug 21, 2004 9:16 pm

hey, bmoulton...trace that white wire back to it's origin, i'm interested now....thanks bud.

MOT1 · Post by **MOT1** » Sun Aug 22, 2004 8:48 am

The white wire is a switched lead and can be used to turn on Pyramid vehicle repeaters and Pac-Rt's. Hope this helps