Pinouts for CommandPlus Console

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
hoser
Posts: 112
Joined: Thu Dec 06, 2001 4:00 pm

Pinouts for CommandPlus Console

Post by hoser »

Anyone have the pinout for the DB-25(F) connector on the back of the CommandPlus console?

My unit won't power up with just the DIN DC cable installed?
User avatar
jayres
Posts: 124
Joined: Wed Nov 07, 2001 4:00 pm

Post by jayres »

The only thing the DB25's on the back are for are for connecting to radios for control... shouldnt affect power, I dont beleive..... I have 2 and they both power up with just the power cord... might make sure the transformer is good...
User avatar
hoser
Posts: 112
Joined: Thu Dec 06, 2001 4:00 pm

Post by hoser »

Thanks for the reply.

BTW, Gai-Tronics still has their 'branded' version of the CommandPlus on their web-site....along with complete pdf versions of the User, Instruction and Installation/Maintenance manuals.

I'm sure the info in these is still valid for the COmmandPlus, I think? :wink:
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”