what do you use for speakers for multi units?

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Post Reply
Screwed
Posts: 148
Joined: Wed Aug 06, 2003 12:47 pm

what do you use for speakers for multi units?

Post by Screwed »

i am looking to have at least 3 remote heads but trying to figure out about the speakers, as i dont see alot with multiple speakers and i do not have alot of room
Top
User avatar
007
Posts: 1546
Joined: Sat Nov 23, 2002 5:22 am
What radios do you own?: W7 FPP lowband MaraTrac w/AES

Post by 007 »

+1

Looking to combine audio from two A9 Spectra's into one speaker, or even the OEM speaker in the driver's door.

Diode's or 1:1 audio xformers....??
Do not make Sig angry...he'll just keep ringing the bell.
Top
WB2IID
Posts: 82
Joined: Wed Sep 10, 2003 5:53 pm

Post by WB2IID »

I presently use three Speco CBS100 speakers on the Kenwood TK-x30 radios in my car. They are tinnier than the OEM speakers and have some distortion at low volume but they're small and they work. They are about 2 3/4 x 3 inches and handle 5 watts IIRC.

Look here for another (but costlier) solution:

http://www.fleetradioproducts.com/4AMP-03.htm

Joe
Top
Post Reply

Return to “Vehicle Radio Installs”