p/n for XTS5000 keyloader cable please
Moderator: Queue Moderator
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
p/n for XTS5000 keyloader cable please
Subject line says it all
I'm looking for the part number for the keyloader cable that will work with the XTS5000
Thanks,
Tom
I'm looking for the part number for the keyloader cable that will work with the XTS5000
Thanks,
Tom
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
-
- was grem467
- Posts: 1145
- Joined: Mon Jul 21, 2003 12:46 pm
- RESCUE161
- Batboard $upporter
- Posts: 2062
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: Too many!
I take NO credit for this map-out of the cable. It does work very well! I had a link to the website that hosted it, but have lost it somewhere. Correct me if I'm wrong, but I think this is another r0f original.
MTS / XTS KVL Cable TDN9390D
KVL Connector, Face view, Lip/Screw Top
LIP HERE
1 o o 6
2 o o 7
3 o o 8
4 o o 9
--------><THUMB SCREW HERE
5 o o 10
Radio Connector, Face View, Spring/Clip Top
SPRING CLIP HERE
----o 7
1 o
----o 8
2 o
----o 9
3 o
----o 10
4 o
----o 11
5 o
----o 12
6 o
----o 13
KVL 1 --- NOT CONNECTED
KVL 2 --> RADIO 4,5,6
KVL 3 --> RADIO 13
KVL 4 --> RADIO 10
KVL 5 --> RADIO 11
KVL 6 --- NOT CONNECTED
KVL 7 --> RADIO 4,5,6
KVL 8 --> RADIO 13
KVL 9 --> RADIO 10
KVL 10 --> RADIO 11
(Edit: to allow for adding dashes. Spacing doesn't stay after posting, so dashes had to be added to keep the propper spaces on the connectors. Sorry for the confusion).
MTS / XTS KVL Cable TDN9390D
KVL Connector, Face view, Lip/Screw Top
LIP HERE
1 o o 6
2 o o 7
3 o o 8
4 o o 9
--------><THUMB SCREW HERE
5 o o 10
Radio Connector, Face View, Spring/Clip Top
SPRING CLIP HERE
----o 7
1 o
----o 8
2 o
----o 9
3 o
----o 10
4 o
----o 11
5 o
----o 12
6 o
----o 13
KVL 1 --- NOT CONNECTED
KVL 2 --> RADIO 4,5,6
KVL 3 --> RADIO 13
KVL 4 --> RADIO 10
KVL 5 --> RADIO 11
KVL 6 --- NOT CONNECTED
KVL 7 --> RADIO 4,5,6
KVL 8 --> RADIO 13
KVL 9 --> RADIO 10
KVL 10 --> RADIO 11
(Edit: to allow for adding dashes. Spacing doesn't stay after posting, so dashes had to be added to keep the propper spaces on the connectors. Sorry for the confusion).
Last edited by RESCUE161 on Sun May 28, 2006 4:31 am, edited 1 time in total.
Scott
KE4FHH
Religion: Kills folks dead!
KE4FHH
Religion: Kills folks dead!
-
- was grem467
- Posts: 1145
- Joined: Mon Jul 21, 2003 12:46 pm
For those seeking to roll thier own. I suggest following this Correct MX diagram, not the one above
http://www.batlabs.com/images/mx300mic.gif
http://www.batlabs.com/images/mx300mic.gif
-
- Posts: 128
- Joined: Wed Jul 07, 2004 8:36 am
- jnglmassiv
- Batboard $upporter
- Posts: 512
- Joined: Sun Feb 24, 2002 4:00 pm
I just tried making this cable and I can't get it to work. I have a TKN8531B hirose cable that works with the saber hirose D adapers. I found a female hirose and installed that in a jedi connector where the audio jack normally goes. I figured I could wired up the right pins and have a jedi end for my XTS.
The diagram above shows the kvl pins basically bridged all the way across except the two top ones. I tried making the cable with the pins bridged and without but nothing works.
Does anyone have a real deal diagram of the wiring for a Jedi / XTS cable?
The diagram above shows the kvl pins basically bridged all the way across except the two top ones. I tried making the cable with the pins bridged and without but nothing works.
Does anyone have a real deal diagram of the wiring for a Jedi / XTS cable?