Anyone have the pinout for this handy? I looked in the model specific section and didn't see it listed. The reference CD that comes with the radios didn't have any information about it either. I need to build a listen only earplug adapter.
Thanks in advance.
XPR6500 Side Accessory Connector
Moderator: Queue Moderator
Re: XPR6500 Side Accessory Connector
Hello rdmahurin
Here is the Pin out Diagram for the mototrbo portable radios from the CPS Help function
![Image](http://img239.imageshack.us/img239/1977/mototrboaccessoryconnectr0.th.jpg)
but before you start building something
as i recall i think that you need to tell the radio that there is some Accessory connected to the radio before is will put the audio out in the accessory connector
but i can not help you whit that but may bee some one else can...???
Maelv.....
Here is the Pin out Diagram for the mototrbo portable radios from the CPS Help function
![Image](http://img239.imageshack.us/img239/1977/mototrboaccessoryconnectr0.th.jpg)
but before you start building something
as i recall i think that you need to tell the radio that there is some Accessory connected to the radio before is will put the audio out in the accessory connector
but i can not help you whit that but may bee some one else can...???
Maelv.....
Re: XPR6500 Side Accessory Connector
This was exactly what I needed -- THANKS!
We have headsets cables with the accessory connector on one end, and a 5-pin Switchcraft connector on the other. I just needed to determine which pins were speaker +/- to make a batch of mono earplug adapters.
We have headsets cables with the accessory connector on one end, and a 5-pin Switchcraft connector on the other. I just needed to determine which pins were speaker +/- to make a batch of mono earplug adapters.
Re: XPR6500 Side Accessory Connector
are there moto or aftermarket accy connectors? i'm thinking of modding a bluetooth adapter to the radio...
also based on the above shown link, is there any direct PTT pin?
on a different project, on the RF coax connector, does the outside ring = ground?
also based on the above shown link, is there any direct PTT pin?
on a different project, on the RF coax connector, does the outside ring = ground?