XTVA Fail 01/90

[n9upw]

Hi, I've got a XTVA with a HHCH that is not working with one of my XTS5000's. It's a VHF MII with host 12.00.11 and DSP 12.00.01 and programmed with CPS R12.01.00. When I place the radio in the XTVA, the light on the HHCH is solid green and the display reads Fail 01/90. The XTVA works fine with my 800 MIII and UHF MI. I've tried two different housings on the VHF and both show the same error. Any ideas?

[tvsjr]

Don't know for certain, but FL 01/90 indicates control head unable to talk to radio. I'd guess damaged flex/accessory connector on the radio - the head is powering up but can't talk to the radio.

[n9upw]

That was my first thought, but I've reseated the flex and tried two different housings and still no go.

[escomm]

taking the housing from the known working radio will either confirm or deny the problem is with the housing. try that next.

[n9upw]

Well I switched the housing with my known working 800 housing and still getting FAIL 01/90. The other thing I forgot to mention is that when the radio is placed in the XTVA, the battery is charging and the back-light on the radio is on, so the radio is sensing being in the XTVA, just not communicating with the HHCH.

[n7maq]

Well I switched the housing with my known working 800 housing and still getting FAIL 01/90. The other thing I forgot to mention is that when the radio is placed in the XTVA, the battery is charging and the back-light on the radio is on, so the radio is sensing being in the XTVA, just not communicating with the HHCH.

I would try another controller in the radio. You have ruled out just about everything else.


Jim