HP 8920 Series Microphone

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
User avatar
Big BOB
Posts: 188
Joined: Tue Sep 04, 2001 4:00 pm

HP 8920 Series Microphone

Post by Big BOB »

I am looking for a microphone that will work with my HP 8920A. Or can someone tell me where to get the 8 pin mic connector.

Thanks
Big BOB
Top
radio_05
Posts: 33
Joined: Tue May 02, 2006 2:09 pm

Re: HP 8920 Series Microphone

Post by radio_05 »

If I remember, the connector should be the same as some Uniden microphones. Same goes with the IFR COM 120. Can't guarantee the pinout, I expect the mic may be without preamp, as the Uniden mic is. You may have to rewire the microphone, easy enough. Of course, a DTMF Uniden mic would be ideal. Check ebay.
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”