Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Advisor II Pagers

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

User avatar
Posts: 1130
Joined: Sat Dec 29, 2001 4:00 pm

Advisor II Pagers

Postby firemedic4 » Fri Feb 04, 2011 1:53 pm

I programmed a ufh Advisor 2 Pager and now the Tones/ Beeps are Really low. Does anyone have a fix for it ? Thanks Bob

Posts: 81
Joined: Wed Oct 12, 2005 6:38 am

Re: Advisor II Pagers

Postby MetroMan » Sat Feb 12, 2011 6:38 pm

Don't remember any setting in software that would lower audio. Common problem with low audio in Advisor IIs. If it's out of warranty you can replace it with a part from Digi-Key, 102-1460.

User avatar
Posts: 16
Joined: Sat Jun 21, 2008 1:39 pm

Re: Advisor II Pagers

Postby goblue » Sat Mar 17, 2012 1:37 am

Yes, the audio tone is programmable. There are about 5 options for the tone.

Posts: 9
Joined: Tue Apr 25, 2006 9:02 pm

Re: Advisor II Pagers

Postby pcleavitt » Thu Apr 26, 2012 8:42 am

Your low tone indicates a bad transducer which can be replaced - free by Motorola if in warranty of by others (us if requested) for a lot less if out of warranty. We also have clean refurbished or new Advisor II's if required.
Philip C Leavitt

User avatar
Johnny Galaga
Posts: 280
Joined: Mon Aug 19, 2002 11:51 pm

Re: Advisor II Pagers

Postby Johnny Galaga » Fri Jun 22, 2012 6:24 pm

Ah yes. I remember buying some gear from Leavitt years ago. A very honest seller with hard to find gear.
Analog already is interoperable.


User avatar
Posts: 16
Joined: Sat Jun 21, 2008 1:39 pm

Re: Advisor II Pagers

Postby goblue » Thu Oct 31, 2013 8:58 pm

Of the 7 options for the alert tone. 2.7KHZ is the loudest. When programming multiple pagers you could have changed the setting to 3.84, 3.2, 3.0, or even 2.5, 1.37, or 1.24, all of which would cause a lower sounding alert/audio. If you read a pager, and then programmed additional pagers without reading them first, all the options will get changed, including the alert/audio option level. You can find this under the alert tab in the programming software. While the transducers do go bad, low alert/audio is usually caused by having the wrong alert frequency selected. When the transducer usually fails it causes no audio or intermittent audio due to a bad solder contact or one of the transducer contacts break from physical damage. You can usually power on the pager and press the pager between your finger were the transducer is on the decoder board and it will work, on and off....
Definitely check your alert settings before sending it out for repair or changing the transducer.

Return to “Motorola Digital and Voice Paging”

Who is online

Users browsing this forum: No registered users and 3 guests