Hello all,
I have a CM series mobile that seems to ignore all programming for PL/DPL on RX.
Does anyone have any experience of this or any advice?
Thanks.
Rich
CM series ignores PL/DPL
Moderator: Queue Moderator
-
- Posts: 38
- Joined: Thu Sep 21, 2006 7:19 am
- SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: CM series ignores PL/DPL
PM coming at you with my email so you can send me a copy of your codeplug. I'll see if I can figure out what's going on for and post the result here in forum.citylink_uk wrote:Hello all,
I have a CM series mobile that seems to ignore all programming for PL/DPL on RX.
Does anyone have any experience of this or any advice?
Thanks.
Rich
-
- Posts: 59
- Joined: Fri May 15, 2009 12:52 pm
Re: CM series ignores PL/DPL
Rich,
Can you tell us a little more about your problem? by ignore do you mean it does not unmute? or does it unmute for everything? perhaps it is monitor when mic off hook setting?
Can you tell us a little more about your problem? by ignore do you mean it does not unmute? or does it unmute for everything? perhaps it is monitor when mic off hook setting?
-
- Posts: 38
- Joined: Thu Sep 21, 2006 7:19 am
Re: CM series ignores PL/DPL
Basically it will unmute on any signal received, rather than unmute on receipt of the CTCSS tone. Not sure about the mic off hook setting, what is that? Thanks.fixanythingman72 wrote:Rich,
Can you tell us a little more about your problem? by ignore do you mean it does not unmute? or does it unmute for everything? perhaps it is monitor when mic off hook setting?
-
- Posts: 59
- Joined: Fri May 15, 2009 12:52 pm
Re: CM series ignores PL/DPL
when the setting is enabled the radio will be monitoring the channel in CSQ when the mic is not hung up. try grounding the clip on the back of the mic and see if your problem goes away. I will also see if I can find were in the cps the setting is. let me know what you find out
-
- Posts: 59
- Joined: Fri May 15, 2009 12:52 pm
-
- Posts: 38
- Joined: Thu Sep 21, 2006 7:19 am
Re: CM series ignores PL/DPL
I appreciate your help. I've had a look for the Off-Hook Defeats PL setting, but I can't seem to find it anywhere.fixanythingman72 wrote:when the setting is enabled the radio will be monitoring the channel in CSQ when the mic is not hung up. try grounding the clip on the back of the mic and see if your problem goes away. I will also see if I can find were in the cps the setting is. let me know what you find out
I've tracked down part of the problem now. The radio is in a repeater setup (Motorola Eurobase) and is connected using a 'M1000' controller. The radio will only pass all signals when connected to the controller.
If I unplug it from the controller, it will mute CSQ and unmute on PL.
I guess I need to try and find a way of programming the controller, the limited information online suggests that may be difficult!