SABER TX PROBLEM

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
FDNY
Posts: 34
Joined: Fri Nov 16, 2001 4:00 pm

Post by FDNY »

hi guys,,

i have a saber 1 UHF...welll when i talk on it for about 30--45mins and the unit is hot the radio drops out of the repeater system..i tried this on to other repeaters....the receive on one of my saber's is stronger then on the one with the problem of dropping out...any ideas????

take care

F.D.N.Y.
Top
User avatar
apco25
Posts: 2685
Joined: Tue Oct 30, 2001 4:00 pm
What radios do you own?: APX / Astro 25 / Harris

Post by apco25 »

Mostlikely your either using the wrong frequency split range or the radio has PA and RX modules from a different split than your radio is programed for. The radio will work but will have degraded performance.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”