I can't get these pieces to programme at all
#7 Ivalid Opcode is all i get.
what am i doing wrong. ???
MOTOROLA M110 HELP
Moderator: Queue Moderator
Hi:
I guess I will have to post a text file
on the Pro's / Con's about stable computer
platforms.
Anyhow, sounds like you are using a Pentium
Class Computer. ( or trying to operate the
program from within a DOS OS under Windows )
DON"T you may end up with a dead radio.
It is highly recommended you use DOS 6.22
and a good stable 386-486-25 Series Computer.
They are all over the place, and will save you alot of Grief. Also the use of a Factory
Motorola Rib is not a bad idea either.
If you are using a Clone, be sure you have
DC Battery, and a wall Power supply is a
good recommendation too.
If you have problems, feel free to contact
me direct
MS
I guess I will have to post a text file
on the Pro's / Con's about stable computer
platforms.
Anyhow, sounds like you are using a Pentium
Class Computer. ( or trying to operate the
program from within a DOS OS under Windows )
DON"T you may end up with a dead radio.
It is highly recommended you use DOS 6.22
and a good stable 386-486-25 Series Computer.
They are all over the place, and will save you alot of Grief. Also the use of a Factory
Motorola Rib is not a bad idea either.
If you are using a Clone, be sure you have
DC Battery, and a wall Power supply is a
good recommendation too.
If you have problems, feel free to contact
me direct
MS
-
raymond345
- Posts: 268
- Joined: Sat Sep 22, 2001 4:00 pm
What are u using for rib box?
What freq.range of radio?
What ver. RSS are u using?
eMail me Raymond eMail [email protected]
What freq.range of radio?
What ver. RSS are u using?
eMail me Raymond eMail [email protected]