HEEELP I went and did it, now what FAIL!!

mancow · Post by **mancow** » Mon Nov 25, 2002 7:34 pm

I couldn't leave good enough alone. I did get it to program once fine. I decided to change some things and went to program again.

It said FAIL 01/82

I changed a duplicated button and tried again. It then said Fail 09/10

I tried again....

now it's back at 01/82

The software said checksum error on the first errored write attempt. It asked to try the corrupted block again or cancel (something like that) I chose cancel.

What the hell now!!!

I'm feeling like an ass now

mancow

mancow · Post by **mancow** » Mon Nov 25, 2002 7:37 pm

Oh hell, Now I got it back again. I cant take this

I'm going to get a beer then sit back and read any posts that come along and am staying away from the programming radio for the night!!!

mancow

mancow · Post by **mancow** » Mon Nov 25, 2002 7:46 pm

By the way it is an Astro Saber III VHF

mancow

007 · Post by **007** » Mon Nov 25, 2002 9:07 pm

Have a cold one for me, too...I'm out !

Don't feel bad...I did this with a MTS2k once. You aren't alone.

JAYMZ · Post by **JAYMZ** » Mon Nov 25, 2002 9:28 pm

Try an original back-up unmodified CP of your radio. Burn that in and start over. If you want I'll share my 2 AS3 CPs with you if you want to try cloning. But you'll end up with my serial number and options channels etc.

Post by **wavetar** » Tue Nov 26, 2002 4:46 am

Fail 09/10 means you set "secure hardware equipped" to "yes" in the radio wide screen, but have no secure hardware in the radio.

Todd

mancow · Post by **mancow** » Tue Nov 26, 2002 5:08 am

Thanks Jaymez I may hit you up on that, but for now I got it going. It's like wavetar said. I didn't have any encryption installed and tried to program it as such.

Gave me a hell of a scare though.

mancow