Batboard

I couldn't leave good enough alone. I did get it to program once fine. I decided to change some things and went to program again.

It said FAIL 01/82

I changed a duplicated button and tried again. It then said Fail 09/10

I tried again.... now it's back at 01/82

The software said checksum error on the first errored write attempt. It asked to try the corrupted block again or cancel (something like that) I chose cancel.

What the hell now!!!

I'm feeling like an ass now


mancow

Oh hell, Now I got it back again. I cant take this

I'm going to get a beer then sit back and read any posts that come along and am staying away from the programming radio for the night!!!


mancow

By the way it is an Astro Saber III VHF

mancow

Have a cold one for me, too...I'm out !

Don't feel bad...I did this with a MTS2k once. You aren't alone.

Try an original back-up unmodified CP of your radio. Burn that in and start over. If you want I'll share my 2 AS3 CPs with you if you want to try cloning. But you'll end up with my serial number and options channels etc.

Fail 09/10 means you set "secure hardware equipped" to "yes" in the radio wide screen, but have no secure hardware in the radio.

Todd

Thanks Jaymez I may hit you up on that, but for now I got it going. It's like wavetar said. I didn't have any encryption installed and tried to program it as such.

Gave me a hell of a scare though.


mancow