I have a astro saber 3 UHF 450-520 I have a problem with microphonic feedback a few weeks ago and that was fixed by replacing the 4 screws that hold the vocoder and rf deck together but now in analog mode and when it's turned up if I tap on the back of the housing I can hear the tapping through the speaker ????? any help would be great.
regards
Mike
Astro saber 3 with rx problems
Moderator: Queue Moderator
-
Elroy Jetson
- Posts: 1158
- Joined: Mon Sep 03, 2001 4:00 pm
If you can only hear this when the channel is active, and it's not overly sensitive, it's not that big a deal. Almost all electronic components have SOME microphonic characteristics.
Both of my UHF Astro Saber III's do what you described, and my VHF one does it just a little bit. I wouldn't worry unless it's bad enough to interfere with communications.
Elroy
Both of my UHF Astro Saber III's do what you described, and my VHF one does it just a little bit. I wouldn't worry unless it's bad enough to interfere with communications.
Elroy