16 pin connectors with wires?

Bill Rogers · Post by **Bill Rogers** » Sun Dec 09, 2001 7:24 am

Hi. Can anyone give the part # for the 16 pin Maxtrac connector that has pins with wires attached in a kit? Thanks, Bill

Monty · Post by **Monty** » Sun Dec 09, 2001 8:15 am

Hi Bill:

I am unable at this time to say
for sure, but the part number
of the acc'y jack kit is:

0180701Y58

Judging by the 19.00 price tag, I suspect
it does have the wires you are looking for.

I do have some if you are interested.

Monty

PS: The Factory Crimp Tool is over 400.00
from Amp to Crimp a ( .10 ) Contact...Great Business consideration.

Reslock · Post by **Reslock** » Sun Dec 09, 2001 9:32 am

There are, actually, some very good parallel crimps from Mac tools. They have an orange handle and are only 25 bucks. They work well and is what we use in the field. We also have the amp crimps, but I find them akward to use.
jt

raymond345 · Post by **raymond345** » Sun Dec 09, 2001 5:47 pm

On eBay they have lots of 16 pin kits.
search maxtrac or gm300/ or radius
they will be there.

Bill Rogers · Post by **Bill Rogers** » Sun Dec 09, 2001 6:06 pm

Thanks for the replies. Many on Ebay like you said Raymond. Thanks, Bill

raymond345 · Post by **raymond345** » Mon Dec 10, 2001 2:05 am

Glad we can help. I have been looking at eBay for a number of years,
I look for people who do not know much about radios and most of the time do not have pics.
The prices are usually very good.Being from
Canada the cost of the u.s.dollar is a killer.

Saber User · Post by **Saber User** » Mon Dec 10, 2001 3:31 am

Hi Monty,

Do you have the part number for the AMP terminals?

Saber User

perthcom · Post by **perthcom** » Mon Dec 10, 2001 6:08 am

I have a quite a number of the 16 pin connectors and pins available at a resonable cost.

The 0180701Y58 number gets you the housing only for 19 bucks (cdn)!! HLN9457 gets you the housing plus about 6 wires.

If you want to make up a professional looking cable, you just need the connector and pins. I got a pin crimp tool from Radio Shack years ago that works well, unfortunately it has no P/N on it, sorry.

email me if you are interested in the housings and pins
[email protected]