CDM1550LS External speaker problem

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
2wayguru

Post by 2wayguru »

I have a CDM 1550 here that will not put speaker audio through the external speaker. I would like to know if there is a jumper or something like that that needs to toggle the external speaker. I have the pins in the right place for the speaker according to the manual. I was also told that the external speaker had to be enabled via rss.. Any info would be apreciated...
motorolacomm
Posts: 14
Joined: Sun Sep 23, 2001 4:00 pm

Post by motorolacomm »

you usually have external spkr on pins
1 ext spkr -
16 ext spkr +
*****(2 outer pins on each side n/u)

this is your acc connector viewed from the rear, (x marks the spot)

........x.
.x........
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”