I am currently in the market for a Astro portable. I would like to listen to what I believe is APCO25/Astro 'Conventional' non-trunked? transmissions. I would also like to be able to analog TX on a frequency allocated to the company I work for @ ~ 450MHz.
Some questions :
Will a radio H04RDF9PW7AN flashed with 180001-000000-9 work ok for this?
How many channels does the Astro Saber II store?
Does the Astro Saber II do CTCSS and DCS?
Which version of the RSS do I need to program the Saber II?
Can one repack the battery cells inside a Saber battery pack?
I know I can probably find this information somewhere in the specifications but I'm a little bit confused/new to Motorola portables.
Thanks for your time,
'Oxide.
Astro Saber II Newbie
Moderator: Queue Moderator
Re: Astro Saber II Newbie
Some questions :
Will a radio H04RDF9PW7AN flashed with 180001-000000-9 work ok for this?
How many channels does the Astro Saber II store?
Does the Astro Saber II do CTCSS and DCS?
Which version of the RSS do I need to program the Saber II?
Can one repack the battery cells inside a Saber battery pack?
1. For future reference, check out this page, there is a chart that will help you decode model #s.
http://www.batlabs.com/astrosab.html
The "R" will help you figure out what bandsplit it is.
Flashcode decoder is here. http://www.radioreference.com/modules.php?name=Flash
Shows this:
180001-000000-9
Q806/G806 IMBE / APCO-25 Digital Operation
H868/W298 Conventional Multikey and Analog Conventional MDC OTAR
H35/G48 Conventional Operation
So you could monitor digital conventional stuff with this radio.
2. 255 channels.
3. Sure does.
4. To program the ASTRO saber II, or any astro saber (or any other radio) , you need at least whatever version was last used on it.
5. I have a feeling Monty will comment here. The packs are sealed up pretty good, and I bet someone has tried this, but not with good results.
Jay
Will a radio H04RDF9PW7AN flashed with 180001-000000-9 work ok for this?
How many channels does the Astro Saber II store?
Does the Astro Saber II do CTCSS and DCS?
Which version of the RSS do I need to program the Saber II?
Can one repack the battery cells inside a Saber battery pack?
1. For future reference, check out this page, there is a chart that will help you decode model #s.
http://www.batlabs.com/astrosab.html
The "R" will help you figure out what bandsplit it is.
Flashcode decoder is here. http://www.radioreference.com/modules.php?name=Flash
Shows this:
180001-000000-9
Q806/G806 IMBE / APCO-25 Digital Operation
H868/W298 Conventional Multikey and Analog Conventional MDC OTAR
H35/G48 Conventional Operation
So you could monitor digital conventional stuff with this radio.
2. 255 channels.
3. Sure does.
4. To program the ASTRO saber II, or any astro saber (or any other radio) , you need at least whatever version was last used on it.
5. I have a feeling Monty will comment here. The packs are sealed up pretty good, and I bet someone has tried this, but not with good results.
Jay
- Dale Earnhardt
- Posts: 848
- Joined: Mon Sep 17, 2001 4:00 pm
-
- Posts: 112
- Joined: Sat May 15, 2004 7:12 pm
- Dale Earnhardt
- Posts: 848
- Joined: Mon Sep 17, 2001 4:00 pm
A good battery should last you for couple of years...... espically those Tall one, which usually comes in 2700mah now..
would probably be spending like 35-70 bucks every 2 years.. or soo....
Just wish Multilplier Sold there 1800mah med cap battery cheaper then there Big Tall High cap 2700mah... never understood that....
would probably be spending like 35-70 bucks every 2 years.. or soo....
Just wish Multilplier Sold there 1800mah med cap battery cheaper then there Big Tall High cap 2700mah... never understood that....