Zetron 38A Pinout

jwood · Post by **jwood** » Thu Mar 28, 2002 8:59 pm

Looking for help with the programming pinout for the 9 pin connector on the Zetron Model 38A Repeater Controller..

Dennis The Menace · Post by **Dennis The Menace** » Sun Mar 31, 2002 8:53 pm

On 2002-03-28 23:59, jwood wrote:
Looking for help with the programming pinout for the 9 pin connector on the Zetron Model 38A Repeater Controller..

The pinout is located on page 4-6 of the 38A manual.

DB9 38A DB25 PC
Pin 3 TXdata ---> to RXdata pin 3
Pin 4 RXdata <--- from TXdata pin 2
Pin 5 Ground <---> to Ground pin 7

Pins 1, 2 & 5 are ground
Pin 6 +12VDC for external use
Pins 7, 8 & 9 are not used

Zetron ZCU software or ProComm can be used.

jwood · Post by **jwood** » Thu Apr 04, 2002 9:35 pm

Thanks, The pin out worked great...