nonstandard dpl/pl???

mr uhf · Post by **mr uhf** » Sun Mar 31, 2002 6:10 pm

Is it possible to program a nonstandard dpl/pl to any of the motorola portables?

Elroy Jetson · Post by **Elroy Jetson** » Sun Mar 31, 2002 6:20 pm

jim · Post by **jim** » Mon Apr 01, 2002 6:07 am

The CDM/PRO/HT series will take a non-standard PL tone.

April · Post by **April** » Mon Apr 01, 2002 2:45 pm

The Zetron M38A can be had with the prom allowing "in between" tones and has a much narrower decode bandwidth. Ol' Chuck Wells used tones in the 30 to 65 hz range to limmit access to his repeaters many years ago.
But then again this limmits the radios that can be used on the system. The M38A can be set to only accept a paticular PL tone AFTER a DTMF sequence, and to disallow that tone upon another DTMF seq. I am not talking about the programming of the tone on-off. It has been a while.

EC-7 · Post by **EC-7** » Mon Apr 01, 2002 8:38 pm

Yaesu ham radios have a few non standard tones.