mts2000 display problem

radioservice · Post by **radioservice** » Tue Oct 26, 2004 11:57 am

Hi everyone,

I've got a couple questions on a MTS 2000 model H01UCH6PW1BN. First off, is this a Model I, II, or III?

Secondly, there are two or three here that have displays that are dificult to read...like the connection may be bad inside...is there a common fix for this?

'preciate your response,

Bill

Rick Rock · Post by **Rick Rock** » Tue Oct 26, 2004 1:12 pm

See the following link: http://batlabs.com/images/mtsxmod.gif That will explain your model# decoding.

motor59 · Post by **motor59** » Tue Oct 26, 2004 5:29 pm

If the problem is missing pixels in the display, you probably are out of luck, as far as a quick fix is concerned.

There's a known problem with some MTS2000 display units. Depending on the age of the radio (which can be determined by the serial number) and it's condition, you may be able to get a (free) depot repair on it...
http://batboard.batlabs.com/viewtopic.php?t=37458 will give you a little more info.