Is it VHF ?

Skiller · Post by **Skiller** » Mon Apr 18, 2005 6:06 am

Hello

When I bought it I thought it was UHF (factory id : H44...) but I just opened it and I saw that :

It's VHF, doesn't it ?
Is it possible to change the quartz ? Because yesterday I bought 4 more saber UHF and they won't be compatible

Thanks in advance
Rémi

DJP126 · Post by **DJP126** » Mon Apr 18, 2005 6:23 am

That's the 16.8 MHz reference oscillator (the high stability one at that) which is common to the VHF & the UHF models. Look at the other module part numbers & let us know what they are. From that info we can tell what the freq range is.

Skiller · Post by **Skiller** » Mon Apr 18, 2005 6:56 am

ok thanks, I didn't have a proper look , I thought it was 168Mhz.

What should I photograph so that you can deduce the frequency range ?

DJP126 · Post by **DJP126** » Mon Apr 18, 2005 7:44 am

The module just below the oscillator (as referenced in the photo) should have the part number stamped on it. It should be either NLE9431A, NLE9432A, NLE9433A or NLE9434A (all are UHF modules). This is the receiver's filter, amplifier & mixer.

Skiller · Post by **Skiller** » Mon Apr 18, 2005 10:48 am

I removed the oscillator but there was nothing below it.

The Pager Geek · Post by **The Pager Geek** » Mon Apr 18, 2005 10:59 am

You can see it in your photo. NLE9431A

UHF Lo Split

tpg

Skiller · Post by **Skiller** » Mon Apr 18, 2005 11:02 am

OK thanks

is it 403-433Mhz ?

DJP126 · Post by **DJP126** » Mon Apr 18, 2005 11:12 am

is it 403-433Mhz ?

Yes it is.

Skiller · Post by **Skiller** » Mon Apr 18, 2005 2:34 pm

Good news

Thanks to all of you !