Batboard

what does 'OLD EMC' mean on a astro saber III display...

how do i correct the problem?

(i replaced a old encryption module, and get this error)


chad

my version numbers...


R7.07.00
DSP N07.03.20
EMC R02.10
KG1 NONE
KG2 NONE
Flashcode 591008-4F1E00-9
1MB
Model H04SDH9PW7AN
Codeplug Ver 000C
Software Option H38

i would be thankful for any more info regarding my error message...
i got the module from ebay (the $100 auction) to replace a bad module
(old module gave error 09/10, but would accept a keyload)


chad

if the EMC firmware is too old for my radio, will motorola upgrade the module firmware, and what would the newest version be (at a resonable price !! )b? who would i call?? (phone numbers would be nice)



thanks

FYI - The EMC firmware version is only an issue when you are using CKR key management which I dought you are or need. Check under secure options and disable CKR. You will have to toggle through several secure screens because once enabled the rss sets other options on. As for the module that you purchased, it sounds like you purchased an un-programmed hybrid. The hybrids are programmed at the time of purchase by the parts dept. The version can only be upgraded by using a kvl3000 with the appropriate pcmcia card installed.

after i disabled CKR, the 'OLD EMC' went away, and KG1 and KG2 have new values..

KG1 = DES-XL
KG2 = DES-OFB

does this sound right???

THANK YOU ALL for your help

chad

i do have multikey, i just keyloaded 6 keys (that i use to talk to my saberIII using DES-XL), and it does work

i keyloaded a DES-OFB key, but can not test that until monday (at work)

i did get the module from the guy on ebay for $100.00

i do not know what my old module had, since it died, and i never bothered to check.. but it DID work w /CKR and OTAR on my radio, so i guess it had a firmware version newer than 2.10

my firmware is
R7.07.00
DSP N07.03.20

elroy said that that is the NEWEST firmware/DSP version out (as of 3 weeks ago, when i got the msg from him)

guess it is too new for OTAR and CKR with a 2.10 module


again - thank you all

the ebay guy said he had 5 more units... im getting atleast 2 more...

chad