AS3 DTMF probs

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
harrisjt2000
NOT ALLOWED TO BUY/SELL/TRADE
Posts: 172
Joined: Sat Nov 22, 2003 7:08 pm

AS3 DTMF probs

Post by harrisjt2000 »

Ok i have a AS3 UHF IMBE and i had an analog conv freq. programmed in with hot key pad enabled and it worked fine and you could hear it pass the dtmf on the other radios fine. NOW i have changed something i dont know i guess and now when you hear it on the other radios it sounds kinda over modulated or like its cutting off. i can hear it fine on the radio it self when keying in the numbers....any ideas?

It only does it when i set the radio to 25.0 Khz channel spacing
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”