Can I read and write an Astro codeplug with RSS 9.0.2 that was programmed with CPS?
Thanks
John
CPS to RSS
Moderator: Queue Moderator
I hope I get this correct as it's been a long day.
If it was programmed with CPS version R01.01.00 or CPS R01.02.00 Then yes you can read it with dos 9.0.2 which is the version that comes with cps R01.02.00, if it was programmed with CPS version R01.03 then you will need the comparable dos version which is something like 9.0.3. Also you can read a dos codeplug into the CPS as long as you aren't working with the codeplug to new problem, IE new codeplug on older software versions but you cannot read a CPS codeplug into DOS.
As long as you do not get the codeplug to new for this application error then you will be ok going from DOS to CPS as long as they are comparable up to date versions of software.
Mike
If it was programmed with CPS version R01.01.00 or CPS R01.02.00 Then yes you can read it with dos 9.0.2 which is the version that comes with cps R01.02.00, if it was programmed with CPS version R01.03 then you will need the comparable dos version which is something like 9.0.3. Also you can read a dos codeplug into the CPS as long as you aren't working with the codeplug to new problem, IE new codeplug on older software versions but you cannot read a CPS codeplug into DOS.
As long as you do not get the codeplug to new for this application error then you will be ok going from DOS to CPS as long as they are comparable up to date versions of software.
Mike