Batboard

I HOPE SOME CAN HELP ME.

I JUST GOT A ASTRO SABER 3 450 TO 512 AND HAVE BEEN TRYING TO US IT FOR WORK. MY PROBLEM IS I HAVE ENTERED THE DIGITAL ACCESS CODE FOR OUR REPEATERS AND IT WORKS. HERES THE PROBLEM. I HAVE TO SOME TIMES KEY UP THE RADIO APPROX. 8-10 SECONDS BEFORE I CAN KEY UP REPEATER. IT IS TRANSMITING W/ NO PROBLEM ON THE INPUT AND THE REPEATER WILL NOT REBROADCAST IT. THEN AFTER APPROX 8-10 SEC'S IT STARTS TO REBROADCAST THE TRANSMISSION. THIS DOESN'T HAPPEN ALL THE TIME. I KNOW IT HAS TO BE A PROGRAMING THING. ANY HELP IS APPRECIATED.

If you are monitoring the input, and it sounds good, most likely its a repeater problem, or your radio is out of adjustment, by alot, or its something else.

How exactly are you "accessing" the repeater, and is anyone else having a problem.

Also, are you using low power? Check your programming to see if the channel is programmed as a low power mode (if that exists, don't remember) and/or see if you have a low power key in your radio's menu, and change it to high. Could be as simple as that.

I WOULD LIKE TO SAY THAT IT IS A ADUSTMENT PROBLEM BUT WHEN IT TRANSIMTS NORMAL AFTER APPORX. 5-10 SECONDS I TEND TO THINK IT IS IN MY PROGRAMING. THERE HAS TO BE A PROBLEM WITH ONE OF MY SETTINGS. I MEAN SOMETIME IT TRANSMITS RIGHT AWAY LIKE IT SUPPOSE TO. BEATS ME. THANKS PJ

Ok, maybe I am not following...

It it just one repeater or many? How about with other radios on simplex?

Are we using CSQ or PL's?

Tell us exactly what you are trying to do and what happens.