Desktrac repeater

n_zero_ndp · Post by **n_zero_ndp** » Mon Mar 04, 2002 10:20 pm

Does the DeskTrac require special RSS? Can anyone please give me any other info? Didn't see much reference to it on the BatLabs site.

TIA

Monty · Post by **Monty** » Mon Mar 04, 2002 10:51 pm

Hi:

If you desire accessing all the features
of the Desktrac, you will need the Desktrac
SW Ver 3.04.00 or higher.

If all you want to do is change freq, you
can do that with Maxtrac Software, but
yo have to access the radio direct to do
it.

MS

n_zero_ndp · Post by **n_zero_ndp** » Mon Mar 04, 2002 11:11 pm

Thanks Monty...

Thought it may be accessible with MaxTrac RSS. So it's just a MaxTrac in a fancy box?

Ken in KC

Will · Post by **Will** » Tue Mar 05, 2002 12:06 am

Monte, you forgot to mention the three position switch on the front panel below the local builtin mic to switch between the two radios and the remote adapter's programming ports.
Use the Maxtrac RSS thru the mic jack on the front panel of the DeskTrac and use the switch to select which radio chassis to read and program.

n_zero_ndp · Post by **n_zero_ndp** » Tue Mar 05, 2002 9:14 am

Thanks to you both.
Found what I thought to be a great deal on one.

TNX for the info.
Ken in KC