GP339 Programming question

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
andrewm
Posts: 4
Joined: Mon Jul 25, 2005 8:19 pm

GP339 Programming question

Post by andrewm »

Hi
I am trying to read a GP339 model number AZH25SDH9AN6 with CPS version R06.04.00 for Professional Radio. This CPS will read my GP328 and GM338 ok. I get an error mssg "Unsupported model". Is this CPS correct? What is the correct CPS for this radio.
Any help appreciated.

Regards
Andrew
Top
Andreas
Posts: 626
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: radios

Post by Andreas »

Did you tried the GM/GP3xx CPS for select 5 radios?

If you get a region error,change the regionalcode to EMEA.

Andreas
Top
aays888
Posts: 33
Joined: Sun Apr 17, 2005 6:36 pm

Post by aays888 »

You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Top
aays888
Posts: 33
Joined: Sun Apr 17, 2005 6:36 pm

Post by aays888 »

You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Top
aays888
Posts: 33
Joined: Sun Apr 17, 2005 6:36 pm

Post by aays888 »

You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Top
andrewm
Posts: 4
Joined: Mon Jul 25, 2005 8:19 pm

Post by andrewm »

aays888 wrote:You are using the wrong program to try and program your 339. You need the R03.00.02 Professional GP300/GM300 CPS.
Hi and thanks for your reply.

I have tried this CPS but I still get a "Radio not supported by this CPS (Error 1052)" when i click ok the next message is "Unable to creat layout for ModelIndex 3 cpStd version 03.00".

Regards
Andrew
Top
aays888
Posts: 33
Joined: Sun Apr 17, 2005 6:36 pm

Post by aays888 »

All I can think of now is your radios firmware may be to old for the S/W, and may need upgrading.
Top
aays888
Posts: 33
Joined: Sun Apr 17, 2005 6:36 pm

Post by aays888 »

All I can think of now is your radios firmware may be to old for the S/W, and may need upgrading.
Top
naseck
New User
Posts: 1
Joined: Tue Jul 10, 2007 1:46 pm

Re: GP339 Programming question

Post by naseck »

try..new version of cps

i got other question how to enable signalling in select 5 tone like mdc system thanks
Top
Post Reply

Return to “Radio Programming”