T3011DX - Read keys from one radio.....

Hightower · Post by **Hightower** » Wed Jun 07, 2006 9:52 pm

Logic tells me that you can not read the keys from one XTS and clone them into another XTS - for security reasons.

Am I correct?

MattSR · Post by **MattSR** » Wed Jun 07, 2006 11:05 pm

Yep.

You cant even read the keys from a keyloader once they have been entered. only way is to get the original keyloader, clone ir into your keyloader, then keyload your radio.

Cheers,
Matt

Hightower · Post by **Hightower** » Sun Jul 02, 2006 9:13 pm

Ok, that makes sense for security reasons.

Thanks for clarifying things

CTAMontrose · Post by **CTAMontrose** » Mon Jul 03, 2006 9:39 am

Apparantly you can do this with a KVL3000+, BUT i have not verified it.

seems like a security hole if this indeed the case.

mr.syntrx · Post by **mr.syntrx** » Tue Jul 04, 2006 6:10 am

It would also void the KVL's FIPS certification, so I doubt it.

MattSR · Post by **MattSR** » Tue Jul 04, 2006 1:49 pm

FIPs mode is optional in a KVL3000. You can turn it on and off, however when you change mode it resets the KVL and loses all keys.

Post by **wavetar** » Wed Jul 05, 2006 3:37 am

grem467 wrote:Apparantly you can do this with a KVL3000+, BUT i have not verified it.

seems like a security hole if this indeed the case.

No, you can't. Or, let me clarify...if it's possible, it's not in the novel of a manual that comes with the KVL3000+. As someone mentioned about FIPS, it would void the certification if it were possible.

Todd

wazzzzzzzzup · Post by **wazzzzzzzzup** » Fri Jul 07, 2006 7:27 pm

what is FIPS?

wazz

RFguy · Post by **RFguy** » Fri Jul 07, 2006 7:50 pm

Federal Information Processing Standards

Example: http://www.itl.nist.gov/fipspubs/fip46-2.htm