I have a someone requesting an HT1000 be programmed to beep every time they change channels using the rotary knob. I've never heard of this and after digging around the programming I couldnt find anything. Does anyone here know if it's possible? He got the idea because his iCom (or some other little company) radio does it. Thanks for any help!
Alex
HT 1000
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
i've never heard of that either. the only thing is last channel discovery or a solid tone on unporgrammed channels.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Active channel tones are only available while SCAN is enabled, no other way is possible through RSS.
The active channel will sound a tone, usually the PRI. channel that is selected in radio options and normally follows the channel selector.
The above scenario does not always hold true, but should you rotate the channel selector, the last active channel will beep once you stop on that channel.
The active channel will sound a tone, usually the PRI. channel that is selected in radio options and normally follows the channel selector.
The above scenario does not always hold true, but should you rotate the channel selector, the last active channel will beep once you stop on that channel.