GM300 Remote head?

flamewild · Post by **flamewild** » Tue Aug 29, 2006 1:26 pm

Does anyone know of a kit to make your GM300 have a remote head? I want to mount the radio in my new truck, but the hole is not deep enough for the radio. I was wandering if there was a wiring harness or something you could use to mount the radio somewhere and have the head somewhere else? Any help would be greatly apprieciated. I love this radio, but I might have to change to a M1225 to get it where I want it.

jim · Post by **jim** » Tue Aug 29, 2006 2:35 pm

The QuickMount kit is what you are looking for.

Max-trac · Post by **Max-trac** » Tue Aug 29, 2006 5:24 pm

Or Moto HLN8144B
Or the LONG kit, HLN8143B.
The one for the Maxtrac is different.

Dennis · Post by **Dennis** » Tue Aug 29, 2006 7:17 pm

Try this link, have had one for seveal years and it works great.

Dennis

http://www.valleyindustrial.com/quickmount/default.htm

Paul · Post by **Paul** » Thu Sep 07, 2006 3:37 am

I fabricated an extension cable with off-market connectors & flat ribbon cable for a customer's vehicle and works great.
Some minor extra work is needed for the speaker cable, that is connected directly on the pc board.
I also used the two remaing holes on the head to fix it on the dashboard ,with long self-screwing screws.

Update: You are talking about GM300, so forget the extra work for the speaker cable (Maxtrac only), since GM300 uses the head's connector.